4 Essential Fluids Your Car Needs

motor oilIf you are not used to the world of car maintenance, it is possible that the only car fluid you might have heard about is engine oil. Keeping your vehicle running smoothly has a whole lot of benefits such as saving big on repairs and preventing breakdowns. You won’t have to be in constant worry of calling guys such as https://belairtowtruck.com/ to come to your rescue. When your check the essential fluids of your car on a regular basis, you get yourself a ticket to keeping your car in a top condition.

Checking car fluids is an inexpensive and straightforward way to prevent engine damage and wear. If you are new to car maintenance, here are essential car fluids you need to keep in optimal condition.

Engine Oil

The motor oil is essential in a car for keeping the moving parts lubricated. Checking this oil on a regular basis helps to maintain the vehicle up and running to its optimum potentials. Checking the oil level doesn’t have to be a tough job. All you need to do is to locate where the oil is kept. First, ensure that your vehicle is in a parked position and the engine is cool. Proceed to remove the dipstick in the oil tank and wipe it with a piece of towel, then re-insert the dipstick back into the tank. Pull it out once more and this time round examine oil mark on the dipstick. Check from the manufacturer’s manual or dipstick calibrations to see if the level is sufficient, else, top up the tank with oil.

Radiator Fluid

The use of radiator fluid in a vehicle is to keep the engine from overheating. If the fluid is low, you are risking your car to have it overheat in the middle of traffic. To check the radiator fluid level, remove the radiator cap and examine the container. In case you do not see the fluid near the top, it’s time to add more. Does that sound simple, yes it is!

Power Steering Fluid

power steering fluidPower steering fluid is used to give your vehicle the ability to control the car while keeping it lubricated. You can find this fluid under the hood, and it is recommended that you check it when the engine is cool. Again, you will need to remove the dipstick, clean it off with a clean piece of towel and re-insert it back to the tank. Wait for about 10-15 seconds before you pull it off and examine the fluid level. If the fluid level is below the right levels, time to add it up.

Brake Fluid

Brake fluid is used for adding power to your brakes and helping you to bring your vehicle to a stop when you need to do so. The fluid is essential for your safety as well as the safety of other road users. To check your brake fluid level, you need to locate the reservoir which can be found towards the back of the engine. Remove the cap and peep inside to see the fluid level. Ensure that the fluid level is within half an inch from the cap, or at the manufacturer’s recommended level.

Leave a Reply

Your email address will not be published. Required fields are marked *